TP/LN-500 Radial Component Cutter:

The Pneumatic TP/LN-500/1 and TP/LN-500/2 Component Cutter Machines are designed to cut the leads of any kind of Radial Components, regardless of the diameter, material, pitch and form. This is possible through the use of a cobalt guillotine blade. The upper plate which determines the cutting height (standard 3.2mm) must be ordered separately to the machine because in most cases it must be designed in a special way to adapt to the requested height, form and pitch of the components. Additional plates to increase the height can be supplied on request.

TP/LN-500/1 – MOL34.0001:
Cutting Area: 53mm x 93mm – Single Cylinder
Standard Stationary Plate must be separately ordered – OL340111
Codes for Special Plates will be provided in the order receipt

TP/LN-500/2 – MOL34.0002:
Cutting Area: 53mm x 93mm – Double Cylinder
Standard Stationary Plate must be separately ordered – OL340112
Codes for Special Plates will be provided in the order receipt