Abisofix Hand Held Enamel Strippers up to 5mm OD
The Abisofix Hand Held Enamel Strippers will strip many film insulations including Enamel for wire sizes from 0.2mm up to 5mm OD.
Description
Additional information
Abisofix Wire Stripper Option
Abisofix Stripping Head Options
Ordering Information
Product Videos
Abisofix Hand Held Enamel Strippers:
The Abisofix Hand Held Enamel Strippers are an all purpose tool capable of removing the enamel insulation from copper wire to facilitate termination, e.g. soldering wire ends of stator and transformer coils.
The Abisofix Magnet Stripper stripping head utilises three weighted tungsten carbide blades, the depth of stripping being controlled by a low voltage bench power supply/speed control unit. The Abisofix Enamel Strippers are also available with an optional strip length limited, fitted to the stripping head for accurate and repeatable results.
The PS42 Power Supply is sold separately – MUK6100.
For batch production an optional electric footswitch and bench holder are also available – CF0110
| Weight | 0.455 kg |
|---|---|
| Dimensions | 40 × 180 × 40 mm |
| Power Supply Input Voltage | 220-240v (110v) |
| Power Supply Output Voltage | 42V |
| Warranty | 12 Months |
Abisofix Wire Stripper Option
| Part Number | Description | Suitable Stripping Heads |
|---|---|---|
| CF0330 | Standard Enamel Wire Stripper Body | All Stripping Head Options can be used with this Enamel Stripper Body |
| CF0331 | Enamel Wire Stripper with Drilled Out Body for Infinite Stripping Lengths | CF0270 - A1 CF0280 - A3 CF0290 - A5 CF0291 - AS CF0297 - AV3 CF0302 - AV5 |
Abisofix Stripping Head Options
| Part Number | Model Number | Replacement Blades Part Number | Description of Stripping Head | Wire Size |
|---|---|---|---|---|
| CF0270 | A1 | CF0020 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head | 0.2-0.8mm OD |
| CF0270/LM | A1LM | CF0020 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head with Length Stop (3-40mm) | 0.2-0.8mm OD |
| CF0280 | A3 | CF0030 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head | 0.6-2.0mm OD |
| CF0280/LM | A3LM | CF0030 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head with Length Stop (3-40mm) | 0.6-2.0mm OD |
| CF0290 | A5 | CF0040 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head | 1.2-4.5mm OD |
| CF0290/LM | A5LM | CF0040 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head with Length Stop (3-40mm) | 1.2-4.5mm OD |
| CF0291 | AS | CF0041 - Sold Each 3 Blades Required | Standard Enamel Wire Stripping Head for Stripping Close to a Component | 0.4-3.0mm OD |
| CF0292 | Type F Milling Tool (AF) | - | Stripping Flat Copper | up to 18mm Wide |
| CF0293 | Twisting Hook (AVH) | - | Twisting 2 or more wires together in a loop | - |
| CF0294 | AFML3 | Available on Request | Stripping Stranded Wires or Wires with Thick-Walled Insulation. Available only with length stop and blade limiter | 0.25-4.0mm OD |
| CF0295 | AFML5 | CF0044 - Sold Each 3 Blades Required | Stripping Stranded Wires or Wires with Thick-Walled Insulation. Available only with length stop and blade limiter | 2.0-5.0mm OD |
| CF0297 | AV3 | - | Twisting Head for Stranded Wires so that they can be inserted into terminals etc | 0.2-2.5mm² |
| CF0302 | AV5 | - | Twisting Head for Stranded Wires so that they can be inserted into terminals etc | 2.5-6.0mm² |
| - | AK1 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 0.5mm |
| - | AK2 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 0.6mm |
| - | AK3 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 0.7mm |
| CF0296 | AK4 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 0.8mm |
| CF0301 | AK5 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 0.9mm |
| - | AK6 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 1.0mm |
| - | AK7 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 1.1mm |
| CF0298 | AK8 | - | Small Knife Head - stripping and cleaning connection pins of lacquer and solder. This creates the required fit for assembly on printed circuit boards. Minimum pin spacing 5.0 mm (4.0 mm under certain conditions). Stripping length 0.5 - 30 mm. The pin diameter can be slightly adjusted. | 1.2mm |
Ordering Information
Each stock code consists of 1 x Enamel Wire Stripper Body, 1 x Stripping Head, 1 x Nose Cone & 1 x Plexiglass Guard. The Power Supply is sold separately.If you require the Wire Stripper with the Drilled Out Body for Infinite Stripping Lengths, all components are sold separately, please replace the CF0330 Stripper Body with the CF0331 Drilled Out Stripper Body and add the Stripping Head, Nose Cone and Plexiglass Guard to a quotation request.
| Stock Code | Enamel Wire Stripper Body Type | Stripping Head | Nose Cone | Plexiglass Guard | Required Power Supply (Sold Separately) |
|---|---|---|---|---|---|
| MC6000 | CF0330 - Standard Body | A1 - CF0270 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6000/LM | CF0330 - Standard Body | A1LM - CF0270/LM | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6001 | CF0330 - Standard Body | A3 - CF0280 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6001/LM | CF0330 - Standard Body | A3LM - CF0280/LM | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6002 | CF0330 - Standard Body | A5 - CF0290 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6002/LM | CF0330 - Standard Body | A5LM - CF0290/LM | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6003 | CF0330 - Standard Body | Twisting Hook (AVH) - CF0293 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6004/3 | CF0330 - Standard Body | AV3 - CF0297 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6004/5 | CF0330 - Standard Body | AV5 - CF0302 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6005 | CF0330 - Standard Body | Milling Tool (AF) - CF0292 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
| MC6006 | CF0330 - Standard Body | AS - CF0291 | CF0050 | CF0060 | MUK6100 - PS42 Power Supply |
