The EC4 Magnet Wire Stripper will strip many film insulations including Enamel, Varnish, Formvar, ML etc for a range of wire sizes between 29 AWG (0.28mm O.D.) and 8 AWG (3.25mm O.D.). Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulations is easily removed. The insert on the EC4 Enamel Wire Stripper is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.
EC4 Pneumatic Enamel Wire Stripping Machine Operation – Simple Setup & Stripping Operation:
1. Loosen the Chuck Assembly with the two wrenches provided.
2. Place Stripping Insert into the chuck and hand tighten.
3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
4. Remove the work piece and start the EC4.
5. Strip the wire by pushing into the Stripping Insert and remove to examine.
6. If insulation is not completely removed, switch of EC4, tighten Chuck Assembly and repeat stripping operation.
Stripping Insert Options:
|Tapered Bullet||Conical Face||Flat Face|
|For stripping in confined areas||For ease of wire entry into insert||For stripping flush to the coil body|
Stripping Insert Selection:
|Wire Size||Heavy Duty||Carbide|
|AWG||Nominal O.D. (mm)||Cross Section Area|
|Conical Face||Flat Face||Tapered Bullet||Slot Size Tech Info Only||Flat Face|
|29-20||0.28-0.81||0.06-0.52||C1 (UK3341)||F1 (UK3351)||B1 (UK3361)||0.8mm||728C|
|20-16||0.81-1.30||0.52-1.33||C2 (UK3342)||F2 (UK3352)||B2 (UK3362)||1.2mm||732C|
|16-14||1.30-1.63||1.33-2.09||C3 (UK3343)||F3 (UK3353)||B3 (UK3363)||1.6mm||736C|
|14-12||1.63-2.06||2.09-3.33||C4 (UK3344)||F4 (UK3354)||B4 (UK3364)||2.0mm||740C|
|12-10||2.06-2.59||3.33-5.27||C5 (UK3345)||F5 (UK3355)||B5 (UK3365)||2.4mm||-|
|10-8||2.59-3.25||5.27-8.30||C6 (UK3346)||F6 (UK3356)||-||2.8mm||-|
|**Note to use F7 and F8 Inserts with Larger Chuck Assembly - Must be purchased UK3406.|
EC4 Pneumatic Enamel Wire Stripper Technical Data:
Dimensions: 270 x 38mm
Air Supply: Oil Daily 60-70 PSI
Warranty: 12 Months