EC2 Evo Enamel Wire Stripper

£698.00 Exc. VAT

The EC2 Evo Enamel Wire Stripping Machine is capable of processing between 0.28mm and 5.18mm Enamel Wires.

SKU: N/A Category:


The EC2 Enamel/Magnet Wire Stripper will strip many film insulations including Enamel, Varnish, Formvar, MI etc for a range of wire sizes between 29 AWG (0.28mm O.D.) and 8 AWG (3.25mm O.D.). Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed. The insert in the EC2 Magnet Wire Stripper is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

EC2 Enamel Wire Stripping Machine Operation – Simple Setup & Stripping Operation:

1. Loosen the Chuck Assembly with the two wrenches provided.
2. Place Stripping Insert into the chuck and hand tighten.
3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
4. Remove the work piece and start the EC2.
5. Strip the wire by pushing into the Stripping Insert and remove to examine.
6. If insulation is not completely removed, switch of EC2, tighten Chuck Assembly and repeat stripping operation.

Stripping Insert Options:

Tapered BulletConical FaceFlat Face
For stripping in confined areasFor ease of wire entry into insertFor stripping flush to the coil body

Stripping Insert Selection:
Wire SizeHeavy DutyCarbide
AWGNominal O.D. (mm)Cross Section Area
Conical FaceFlat FaceTapered BulletSlot Size Tech Info OnlyFlat Face
29-200.28-0.810.06-0.52C1 (UK3341)F1 (UK3351)B1 (UK3361)0.8mm728C
20-160.81-1.300.52-1.33C2 (UK3342)F2 (UK3352)B2 (UK3362)1.2mm732C
16-141.30-1.631.33-2.09C3 (UK3343)F3 (UK3353)B3 (UK3363)1.6mm736C
14-121.63-2.062.09-3.33C4 (UK3344)F4 (UK3354)B4 (UK3364)2.0mm740C
12-102.06-2.593.33-5.27C5 (UK3345)F5 (UK3355)B5 (UK3365)2.4mm-
10-82.59-3.255.27-8.30C6 (UK3346)F6 (UK3356)-2.8mm-
8-63.25-4.118.30-13.30-F7** (UK3351)---
6-44.11-5.1813.30-21.10-F8** (UK3351)---
**Note to use F7 and F8 Inserts with Larger Chuck Assembly - Must be purchased UK3305.

EC2 Enamel Wire Stripping Machine Technical Data:
Dimensions: 170 x 210 x 160mm
Weight: 3.8Kgs
Voltage: 220/240V (110V available on request)
Warranty: 12 Months


There are no reviews yet.

Be the first to review “EC2 Evo Enamel Wire Stripper”

Your email address will not be published. Required fields are marked *

error: Content is protected !!