Push Start Standard Brushless Electric Screwdriver Range. Models available with Torque Ranging between 0.2Nm and 12Nm.
If you have one of the Old Style 2000-9000 Series Sumake Electric Screwdrivers, these have now been discontinued, please see the Required Replacements Tab above.
Please note: All Electric Brushless Screwdrivers will be ESD Safe as Standard. We do have some stock available with the original standard casings and these can possibly be supplied by request, please contact us for more information.
High performance brushless motor design for increased durability and flexibility. This is a brand new Electric Screwdriver Range from Sumake featuring a new brushless motor. The benefits of this new motor design are to improve durability and offer a wider range of torque and r.p.m – this is because in brushless motors, communication is achieved electronically and therefore they are capable of very high speeds and torque without arcing. As brushless motors have a lower thermal resistance they are able to operate in a much wide temperatrure range and will achieve a higher duty cycle. No brushes also mean a reduction in maintenance and no brush contamination to the bearings or environment which also makes these Electric Screwdrivers safer when in contact with fluids due to the elimination of arcing. Lastly due to the lower thermal resistance, these Brushless Electric Screwdrivers are capable of operating in wider temperature ranges, have higher torque to inertia ratios and greater acceleration. The smaller brushless motor can do the same job as their much larger counterparts would otherwise be used for – this also results in a reduction in costs.
Please note that some models supplied may start with BN*** instead of the B*** listed below, this is due to the manufacturer changing the part numbers.
Model No | Torque Range (Nm) | Speed (Hi/Low) | Machine Screw (mm) | Power Source | Screwdriver Bit Size |
---|---|---|---|---|---|
B412P6 | 0.20-1.18 | 1000/700 | 1.6-3.0 | DC24/32V | A Hex 5mm B Hex 6.35mm C Ø4mm D Ø5mm |
B412PH6 | 0.20-1.18 | 2000/1400 | 1.6-3.0 | DC24/32V | A Hex 5mm B Hex 6.35mm C Ø4mm D Ø5mm |
B417PH6 | 0.29-1.67 | 2000/1400 | 1.6-3.0 | DC24/32V | A Hex 5mm B Hex 6.35mm C Ø4mm D Ø5mm |
B419P6 | 0.29-1.86 | 1000/700 | 2.3-3.5 | DC24/32V | A Hex 5mm B Hex 6.35mm C Ø4mm D Ø5mm |
B630P/C6 | 0.98-2.94 | 1000/700 | 2.6-4.0 | DC40V | A Hex 5mm B Hex 6.35mm |
B630PH/C6 | 0.98-2.94 | 2000/1300 | 2.6-4.0 | DC40V | A Hex 5mm B Hex 6.35mm |
B650P/C6 | 1.96-4.90 | 1000/700 | 4.0-5.0 | DC40V | B Hex 6.35mm |
B760P/C6 | 2.0-6.0 | 2200/1650 | 4.0-5.0 | DC30/40V | B Hex 6.35mm W 3/8" Square |
B790P/C6 | 3.0-9.0 | 1000/750 | <6.0 | DC30/40V | B Hex 6.35mm W 3/8" Square |
B7120P/C6 | 6.0-12.0 | 880/660 | <8.0 | DC30/40V | B Hex 6.35mm W 3/8" Square |
(TFR = Torque Fixing Ring)
Image | Accessory Type | Applicable Models | Accessory Part No | Lever/Push Start |
---|---|---|---|---|
![]() | 90 Degree Attachment Head | B630L, B650L | EAA-AH1 | Lever Start Only |
![]() | 90 Degree Attachment Head | B412L, B419L | EAA-AH2 | Lever Start Only |
![]() | Pistol Grip Attachment | B630L-B650L | EAA-LG3 | Lever Start Only |
![]() | Pistol Grip Attachment (/S for ESD Models) | B630L-B650L | EAA-LG3/S | Lever Start Only |
![]() | Pistol Grip Attachment | B630P-B650P | EAA-PG3 | Push Start Only |
![]() | Pistol Grip Attachment (/S for ESD Models) | B630P-B650P | EAA-PG3/S | Push Start Only |
![]() | Suspension Holster (With TFR) | B412-B419 | EAA-HD2 | Lever & Push Start |
![]() | Suspension Holster | B630-B650 | EAA-HD2 | Lever & Push Start |
![]() | Suspension Holster | B412-B419 | EAA-HD4 | Lever & Push Start |
![]() | Suspension Holster (or With TFR) | B203-B210 | EAA-HD5 | Lever & Push Start |
![]() | Torque Fixing/Locking Ring | B412-B419 | EAA-TL6 (/E for ESD Models) | Lever & Push Start |
![]() | Torque Fixing/Locking Ring | B630-B650 | EAA-TL7 (/E for ESD Models) | Lever & Push Start |
![]() | Torque Fixing/Locking Ring | B203L-B210L | EAA-TL8 (/E for ESD Models) | Lever Start Only |
![]() | Torque Fixing/Locking Ring | B101L-B103L | EAA-TL9 (/E for ESD Models) | Lever Start Only |
![]() | Screwdriver to PSU Connector Lead (6 Pin Configuration - 6 pins around the outside) | B203-B650 | EPAA5001-56N | Lever & Push Start |
Standard Power Supply Unit Supplied with each Screwdriver Model:
Model No | Operating Vol. (AC) | Output Vol. (DC) | Output Capacity | Dimensions (mm) | Recommended Models |
---|---|---|---|---|---|
B12HL30T/C3 | 100-240V | 9V;12V | Low/Hi Max 2.5A | 105 x 52 x 31 | B101-B103 |
B32HL61T6 | 100-240V | 24V;32V | Low/Hi Max 1.8A | 145 x 60 x 35 | B203L-B412L B419L, B412P, B419P |
B32HL62T6 (High Speed Models) | 100-240V | 24V;32V | Low/Hi Max 1.8A | 200 x 80 x 66 | B412LH-B417LH B412PH-B417PH |
B40HL501T/C6 (Inc High Speed Models) | 100-240V | 30V;40V | Low/Hi 5.5A | 213 x 135 x 70 | B630L-B650L B630P-B650P |
B40HL801T/C6 | 110-240V | 30V;40V | Low/Hi 5.5A | 213 x 135 x 70 | B760L-B7120L B760P-B7120P |
Discontinued Sumake Screwdrivers | Torque Range (Nm) | Speed (Rpm) | - | New Replacement Screwdriver | Torque Range (Nm) | Speed (Rpm) | Required Power Supply |
---|---|---|---|---|---|---|---|
EXT BRUSH SCREWDRIVER SERIES | |||||||
EA-2000 | 0.0392-0.147 | 720 | - | EA-203L | 0.02-0.34 | 700/1000 | SP-32HL60T/C |
EA-2000S | 0.0392-0.147 | 1000 | - | EA-203L | 0.02-0.34 | 700/1000 | SP-32HL60T/C |
EA-4000 | 0.098-0.588 | 720 | - | EA-207L | 0.05-0.69 | 700/1000 | SP-32HL60T/C |
EA-4000S | 0.098-0.588 | 1000 | - | EA-207L | 0.05-0.69 | 700/1000 | SP-32HL60T/C |
EA-4500 | 0.147-0.98 | 720 | - | EA-412L or EA-412P | 0.10-1.18 | 700/1000 | SP-32HL60T/C |
EA-4500S | 0.147-0.98 | 1000 | - | EA-412L or EA-412P | 0.10-1.18 | 700/1000 | SP-32HL60T/C |
EA-6500 | 0.392-1.764 | 1000 | - | EA-618L or EA-618P | 0.49-1.77 | 700/1000 | SP-32HL60T/C |
EA-7000 | 0.686-1.96 | 700 | - | EA-624L or EA-624P | 0.69-2.35 | 520/750 | SP-32HL60T/C |
EA-7500S | 0.686-2.92 | 1000 | - | EA-630L or EA-630P | 0.78-2.94 | 350/530 | SP-32HL60T/C |
EA-8000 | 1.176-2.92 | 550 | - | EA-730L or EA-730P | 0.98-2.94 | 520/750 | SP-32HL60T/C |
EA-8500 | 1.176-3.92 | 700 | - | EA-745L or EA-745P | 1.47-4.41 | 350/530 | SP-32HL60T/C |
EA-9000 | 1.96-4.90 | 500 | - | EA-745L or EA-745P | 1.47-4.41 | 350/530 | SP-32HL60T/C |
BRUSHLESS SCREWDRIVER SERIES | |||||||
EA-2000 | 0.0392-0.147 | 720 | - | EA-B203L | 0.02-0.34 | 700/1000 | SP-B32HL61T/C6 |
EA-2000S | 0.0392-0.147 | 1000 | - | EA-B203L | 0.02-0.34 | 700/1000 | SP-B32HL61T/C6 |
EA-4000 | 0.098-0.588 | 720 | - | EA-207L | 0.05-0.69 | 700/1000 | SP-B32HL61T/C6 |
EA-4000S | 0.098-0.588 | 1000 | - | EA-B207L | 0.05-0.69 | 700/1000 | SP-B32HL61T/C6 |
EA-4500 | 0.147-0.98 | 720 | - | EA-B412L or EA-B412P | 0.15-1.18 | 700/1000 | SP-B32HL61T/C6 |
EA-4500S | 0.147-0.98 | 1000 | - | EA-B412L or EA-B412P | 0.15-1.18 | 700/1000 | SP-B32HL61T/C6 |
EA-6500 | 0.392-1.764 | 1000 | - | EA-B419L or EA-B419P | 0.29-1.86 | 700/1000 | SP-B32HL61T/C6 |
EA-7000 | 0.686-1.96 | 700 | - | EA-B419L or EA-B419P | 0.29-1.86 | 700/1000 | SP-B32HL61T/C6 |
EA-7500 | 0.686-2.92 | 1000 | - | EA-B630L or EA-B630P | 0.98-2.94 | 750/1000 | SP-B40HL501T/C6P |
EA-8000 | 1.176-2.92 | 550 | - | EA-B630L or EA-B630P | 0.98-2.94 | 750/1000 | SP-B40HL501T/C6P |
EA-8500 | 1.176-3.92 | 700 | - | EA-B650L or EA-B650P | 1.96-4.90 | 750/1000 | SP-B40HL501T/C6P |
EA-9000 | 1.96-4.90 | 500 | - | EA-B650L or EA-B650P | 1.96-4.90 | 750/1000 | SP-B40HL501T/C6P |