Productor II Toroid Winder

The Productor II Toroid Winder features a Heavy Duty Drive, Dual Preset Counters, Instantly Removable Shuttles, a 360° Core Rotation, Front Loading or Optional Overhead Dereeler with Wire Cutter and Up to 2000 turns per minute.

Productor II Toroid Winding Machine:

The Productor II Toroid Winder features a Heavy Duty Drive, Dual Preset Counters, Instantly Removable Shuttles, a 360° Core Rotation, Front Loading or Optional Overhead Dereeler with Wire Cutter and Up to 2000 turns per minute.

Main Characteristics:
4″ and 6″ Precision Winding Heads which accommodates wires from 18 AWG to 42 AWG.
Wide core size range using the four winding heads available, core sizes from 0.55″ I.D. (1.40mm) to 4″ (101.6mm) can be wound.
Variable Speed: Ball bearing four roller drive rotates the shuttle at speeds up to 2000 turns per minute using the 4 inch head.
Removable Shuttles: Thirty-three sizes of easily removable precision shuttles permit a large variety of cores to be wound.
Jockey Stick Core Positioning: The entire core holder assembly may be moved back, forward or sideways while the core is being wound.
Predetermined Counters: Electronic counters guarantee accurate counting. Dual preset electronic counter – standard equipment (one for loading and one for counting turns).
Core Rotation: Three powered driving rollers insure positive rotation of the core through a variable speed range.

Productor II Toroid Winder Technical Data:
Choice of Winding Head: 4″ or 6″ heads complete with one shuttle and associated accessories.
Shuttle Sizes: 4″ Wire Slider Shuttles – 0.055″, 0.062″, 0.075″, 0.100″, 0.115″, 0.135″.
Shuttle Sizes: 4″ Side Slider Shuttles – 3/16″, 1/4″, 5/16″, 3/8″.
Shuttle Sizes: 4″ Belt Head Shuttles – 0.093″, 0.100″ 0.115″, 0.125″, 0.135″, 3/16″, 1/4″, 5/16″, 3/8″.
Shuttle Sizes: 6″ Side Slider Shuttles – 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″.
Shuttle Sizes: 6″ Belt Shuttles – 3/16″, 1/4″, 5/16″, 3/8″, 1/2″.
Wire Sizes: 18~42 AWG with the 4″ or 6″ heads and 18 AWG with the new 6″ x 1/2″ belt shuttle.
Core Sizes: 0.055″ I.D. to center of 2″ O.D. with 4″ head.
Core Sizes: 3/16″ I.D. to center of 4″ O.D. with 6″ head.
Shuttle Speed Control: By push button start or stop, by footswitch or by variable speed foot pedal from 0 to 2000 RPM with a 4″ head
Motor: 3/4″ H.P. permanent magnet DC motor with SCR control.
Power: 115V 50/60Hz or 220V 50/60Hz, single phase.
Dimensions: 21″ W x 20″ D x 22″ H with overhead dereeler – 15″ H without.
Weight: 80lbs, crated shipping weight 150lbs.
Core Holding: Light duty and medium duty rotator assemblies. Both have three drive rollers (all driving). Core rotator assembly can be moved in any direction by the jockey stick for final centering of the shuttle in the toroid.
Core Rotation: The Productor II normally has counter clockwise core rotation which is most commonly used for the best layering of the wire. Reverse direction, if desired can be easily done in a few minutes by reversing the timing belt inside the machine. The vernier dial on the console controls variable core rotation speed. Core rotation is engaged or disengaged by a handy mechanical clutch knob.

Product Order Code:
CWG-4010-4S – Gorman Productor II Coil Winder

error: Content is protected !!