EC2 Evo Enamel Wire Stripper

EC2 Evo Enamel Wire Stripper:

The EC2 Enamel/Magnet Wire Stripper will strip many film insulations including Enamel, Varnish, Formvar, MI etc for a range of wire sizes between 29 AWG (0.28mm O.D.) and 8 AWG (3.25mm O.D.). Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed. The insert in the EC2 Magnet Wire Stripper is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

EC2 Enamel Wire Stripping Machine Operation - Simple Setup & Stripping Operation:

1. Loosen the Chuck Assembly with the two wrenches provided.
2. Place Stripping Insert into the chuck and hand tighten.

3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
4. Remove the work piece and start the EC2.
5. Strip the wire by pushing into the Stripping Insert and remove to examine.
6. If insulation is not completely removed, switch of EC2, tighten Chuck Assembly and repeat stripping operation.

Stripping Insert Options:

Tapered Bullet Conical Face Flat Face
For stripping in confined areas For ease of wire entry into insert For stripping flush to the coil body


Stripping Insert Selection:

Wire Size Heavy Duty Carbide
AWG Nominal O.D. (mm) Cross Section Area
(mm²)
Conical Face Flat Face Tapered Bullet Slot Size Tech Info Only Flat Face
29-20 0.28-0.81 0.06-0.52 C1 (UK3341) F1 (UK3351) B1 (UK3361) 0.8mm 728C
20-16 0.81-1.30 0.52-1.33 C2 (UK3342) F2 (UK3352) B2 (UK3362) 1.2mm 732C
16-14 1.30-1.63 1.33-2.09 C3 (UK3343) F3 (UK3353) B3 (UK3363) 1.6mm 736C
14-12 1.63-2.06 2.09-3.33 C4 (UK3344) F4 (UK3354) B4 (UK3364) 2.0mm 740C
12-10 2.06-2.59 3.33-5.27 C5 (UK3345) F5 (UK3355) B5 (UK3365) 2.4mm -
10-8 2.59-3.25 5.27-8.30 C6 (UK3346) F6 (UK3356) - 2.8mm -
8-6 3.25-4.11 8.30-13.30 - F7** (UK3351) - - -
6-4 4.11-5.18 13.30-21.10 - F8** (UK3351) - - -
**Note to use F7 and F8 Inserts with Larger Chuck Assembly - Must be purchased UK3305.

EC2 Enamel Wire Stripping Machine Technical Data:
Dimensions: 170 x 210 x 160mm
Weight: 3.8Kgs
Voltage: 220/240V (110V available on request)
Warranty: 12 Months
Product Order Code: MUK3300 - EC2 Enamel Wire Stripper

[table “193” not found /]

error: Content is protected !!