Radial Component Preparation

AS1 Electric Automatic Feeding System for TP/R-PR

The AS1 is an automatic system that fits only the TP/R-PR machine. This accessory allows the machine to reach higher unattended production.

TP/LN100 Loose Radial Pneumatic Component Cutter

The pneumatic machine TP/LN-100 is used for cutting the leads of loose radial components. It was designed to adapt to a very wide range of radial parts.

TP/LN500 Loose Radial Pneumatic Component Cutter

The pneumatic machine TP/LN-500 is used for cutting the leads of loose radial components by using a guillotine type lower blade.This model can handle any kind of components regardless of the diameter, pitch or form.

TP/R-PR Taped Radial Component Cutting and Forming Machine

The model TP/R-PR is a very versatile machine for cutting and forming taped radial components. Foot pedal operation which controls the down stroke of the cylinder that moves the upper die, which cuts and forms the component leads.

TP/SC4 Loose Radial Component Cutting & Forming Machine

The model TP/SC4 is a very flexible pneumatic machine designed for cutting and forming loose radial components. Any of the available forms can be used with the standard version with two cylinders (MOL16.0000).

TP/TC4 Loose Radial Component Cutting Machine

The model TP/TC4 is designed for cutting loose and taped radial components. A speed control knob adjusts the feeding speed. The manual component feed is quick and easy.

TP6/R Taped Radial Component Cutter

The model TP6R is designed for cutting taped radial components 0.4mm to 1.0mm in diameter. There are 2 versions of this machine with different drive wheels to take 12.7mm and 15mm pitch tape.

error: Content is protected !!
+ +