|
COUNTY COMPONENT COUNTER - LIST OF CONTENTS |
1. TECHNICAL FEATURES
1.1
Keyboard
1.2 ON/OFF
control
1.3
Counting direction
1.4 Component lead number
1.5 Control section
1.6 Preset data entry keyboard
1.7 Special functions
1.8 Back of machine connections
1.9 Models
1.10 Optional accessories
2. SETUP
2.1 Unpacking
2.2 Locating your County
2.3 Power supply
3. OPERATIVE
INSTRUCTIONS
3.1 Preliminary operations
3.2 Totalizer
3.3 PRESET mode counting
3.4 Battery
3.5 Maintenance
4. SMD ADAPTOR
4.1 Operative instructions
5. EXTERNAL DETECTOR
5.1 External Head
6. SUPERFORM PREFORMING
MACHINE CONTROL
6.1 Totalizer
6.2 Preset mode
6.3 Slow down mode
7. THERMAL LABEL PRINTER
7.1 Parameter setup
7.2 Parameters
7.3 Label printing
8. CALIBRATION PROCEDURE
AND TEST
8.1 Automatic recalibration
8.2 Manual
recalibration
TECHNICAL FEATURES
|
Keyboard Selection : |
 |
To Turn the Unit 'ON' press the ON Pushbutton and hold
until the County lights up
To Turn the Unit 'OFF' push the OFF Pushbutton.
|
Keyboard Selection : |
 |
Press the Left Arrow = Left counting direction (L1 is on)
Press the Right Arrow = Right counting direction (L2 is on)
|
Keyboard Selection : |
 |
L3 LED bar graph indicates the actual divider.
Press UP Arrow to increase component lead number.
Press Down Arrow to decrease component lead number.
|
Keyboard Selection : |
 |
Press CLEAR to reset display and to set TOTALIZER mode counting.
Press PRESET to recall previous memorized preset value and to set PRESET mode counting.
|
Keyboard Selection : |
|
| This key is reserved for special
functions 1. During Programming Printer parameter setting: Country, date, time, Bar Code 2. During execution: thermal label printing. |
|
1.8 BACK OF MACHINE CONNECTIONS
|
|
|
MOL8301.051 |
: |
220Vac |
| MOL8301.052 | : | County with battery, 220Vac |
| MOL8301.072 | : | 220Vac, with battery, relay, printer output, watch |
|
MOL8301.053 |
: |
110Vac |
| MOL8301.054 | : | County with battery, 110Vac |
| MOL8301.074 | : | 110Vac, with battery, relay, printer output, watch |
|
8301.023 |
: |
Complete support for rolled bandolier |
| 8301.025 | : | Bandolier holder |
| 8301.031 | : | External Probe - to be fitted with Superform Machines |
|
8301.033 |
: |
Connecting Cable for Superform machine control |
| 8301.018 | : | SMD Adaptor |
| 8301.028 | : | SMD Reel Support |
| 8301.030 | : | Handle for SMD Reel Support |
| 8301.090 | : | Thermal label Printer |
| 8301.091 | : | Thermo Adhesive roll paper, 20 meters. |
2. SETUP
Open the carton and check to see all the following items are there :-
1. COUNTY
component counter corresponding to the model printed on the outside of the
packing carton.
2. Power Cord
3. User's Manual (this manual)
Warning
As you unpack
the County, set aside and save the packing materials. They will come in handy in
case you need to transport it or send it back to recalibration.
2.2 LOCATING THE COUNTER
Chose the location
Series 4 Limited / Wire
Stripping / Copyright © Series 4 Limited 1995 ~ 2011
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk
