|
||||||||
|
||||||||
| The pneumatic machine
TP/LN-500 is used for cutting the leads of loose radial components by using ‘guillotine’ type lower blade. |
|
| This model can handle any kind of components regardless of the diameter,
pitch or form. The pneumatic foot pedal which performs a quick cut of the leads, without any stress to the components The upper plate which is supplied as standard with the machine and determines the cutting height, which is 3,2mm Additional plates to increase this height can be ordered on request, starting from 0.5mm. The standard grid pattern accommodates most types of components. Special grid pattern plates can be provided on request. Note:- Minimum Plate Thickness 2.4mm (Smaller by selective milling on the top plate) |
|
|
MM
|
INCH
|
|
||||||||||
|
|
|
||||||||||
|
** Note Fixed Plate thickness - 3.2mm Other sizes on request |
||||||||||||
|
TECHNICAL DATA
|
 |
|
 |
Series 4 Limited / Wire
Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk
Data Sheet TP/LN500
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section25/ds76.htm
