DATA SHEET 71
  TP6/V-PR
VERTICAL AXIAL COMPONENT FORMER WITH JOGGLE

 
The TP6/V-PR is designed for cutting and bending taped axial components for vertical mounting.

It handles components with a lead diameter 
from 0.5 - 0.8 mm (.019 to .031”).

The standard formed component will lock into
the P.C. Board. 

The pitch can be adjusted by replacing the die 
assembly which changes the length of the
protrusion.

The standard unit is hand operated but can be 
enhanced by the following accessories:-

CS20 loose component feeder to handle loose parts.

The motor drive unit MOT98 with optional foot pedal, this unit has an adjustable speed control and can be used with loose or taped components.

When working with components on tape we suggest you use the BR6 reel holder and the TNS waste ejection system.


Model TP6/V-PR/1  with pre-forming tooling P=2.54mm (0.1") MOL86.OL01
 

MM
 min max

INCH
 min max

A
L
F
C
e
b
d
D
P
2.8 5.0
3.0 15.0
4.3 10.0
1.5 5.0
1.2 4.0
1.0 1.0
0.5 0.8
0.5 4.0
2.54 Fixed
0.110 0.196
0.118 0.590
0.169 0.393
0.059 0.196
0.047 0.157
0.039 0.039
0.019 0.031
0.019 0.157
0.1 Fixed

 

Model TP6/V-PR/2  with pre-forming tooling P=5.08mm (0.2") MOL86.OL02
 

MM
 min max

INCH
 min max

A
L
F
C
e
b
d
D
P
3.0 5.0
3.0 15.0
4.3 10.0
1.5 5.0
1.2 4.0
1.0 1.0
0.5 0.8
0.5 8.0
5.08 Fixed
0.118 0.196
0.118 0.590
0.169 0.393
0.059 0.196
0.047 0.157
0.039 0.039
0.019 0.031
0.019 0.314
0.2 Fixed

 

 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2011
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet TP6/V-PR
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section21/ds71.htm