DATA SHEET 20-001

The model CUTBEND is a low cost high quality Swiss built resistor cutting and forming machine. The CUTBEND can easily be adjusted and readjusted for different components and dimensions. 

The CUTBEND is a handy and light machine that can be mounted to any table using it's simple 'G' clamp supplied with the unit.
 The standard unit will process leg diameters up to 0.8mm diameter. Other units are available going down to 0.3mm and up to 1.2mm in lead thickness.

Series 4 always carry spare parts for this unit that has sold in excess of 35,000 pieces worldwide.


Further Technical Data
& Exploded Diagrams

Setting of the component pitch and leg length is a quick and easy operation using the supplied Pitch Setting Tool.

 

                                        
 

 
TECHNICAL DATA

SIZE

:

175mm x 145mm x 160mm Without Handle

MACHINE WEIGHT : 1.6 Kgs
GROSS WEIGHT : 1.9 Kgs

 

     
Series 4 Limited / Wire Stripping / Copyright � Series 4 Limited 1995 ~ 2013
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk
     
Data Sheet CUTBEND can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section20/ds20-001.htm