DATA SHEET 94
  ELECTRIC SCREWDRIVER - MINI TYPE
LOW VOLTAGE DC ELECTRIC OR ELECTRIC VACCUM

 

MINI TYPE ELECTRIC SCREWDRIVER
 		  

This is a brand new electric driver from Sumake and is a miniature type designed for tightening small size screws and fasteners used in the high tech 3C assembly lines, with high quality in mind.

This driver uses a high precision Swiss aviation grade driving motor and delivers a high performance. It is fabricated with unique winding technology and has a swift response, compact structure, high stability and an extremely long life span. It produces low electromagnetic interference, noise and inertia.

The carbon brushes in this driver can sustain more than 20,000 hours under favourable conditions and it comes supplied with controller.


The dimensions are only 158mm long with a weight of 187g.

 

 

 

 

 
 Mini Type Electric Screwdriver  Specification                                     

Model

 Torque Range

No load
Speed

 Weight Length Grip Dia
Power Source
 		 Fastening Capacity

aaMachineaa
Screw Dia

 aaTappingaa
Screw Dia

kgf-cm I bf-in (r.p.m) g Ib mm in mm in   mm in mm in

S2000M

 0.3 ~ 2.0 0.26 ~ 1.7

1000

187

0.4

158

 6.2 26 1.0 30VDC

1.0 ~ 2.2

0.04 ~ 0.09

 1.0 ~ 2.0 0.04 ~ 0.08

S2500M

 0.4 ~ 3.0 0.35 ~ 2.6

650

187

0.4

158

 6.2 26 1.0 30VDC 1.0 ~ 2.6

0.04 ~ 0.10

 1.0 ~ 2.0 0.04 ~ 0.08


 
MINI TYPE ELECTRIC SCREWDRIVER/VACUUM PICK UP
 		  

This is a another new electric driver from Sumake in the miniature range and is again designed for tightening small size screws and fasteners used in the high tech 3C assembly lines and where precise torque is required. This driver has an extremely high torque accuracy and stepless torque setting.

Unlike other brands, the motor does not generate any carbon article overflow which therefore makes it suitable for 3C industries.

This tool is fitted with 6 propellant shafts to assist in the reduction of mechanical friction and to keep tip vibration to a minimum, this improves torque precision.

This electric/vacuum screwdriver is extremely durable and long lasting, outlasting many other brands.  The Swiss patented low inertia  motor used in this driver permits continued operation for at least 20,000 hours (around 10 years average use).  The service life of the contact point will sustain around 10 million on and off contacts. Supplied with AP3 controller.

The dimensions are only 198mm long with a weight of 290g.

 

 

 

  


Mini Type Electric Screwdriver with Vacuum Pick Up Specification        
 

Model Torque Range No load
Speed		 Weight Length Grip Diam
Power Source
 		 Fastening Capacity

aaMachineaa
Screw Dia

 aaTappingaa
Screw Dia
kgf-cm I bf-in (r.p.m) g Ib mm in mm in   mm in mm in
S2000MA 0.3 ~ 2.0 0.26 ~ 1.7 1000 290 0.6 198 7.8 26 1.0 30VDC 1.0 ~ 2.2 0.04 ~ 0.09 1.0 ~ 2.0 0.04 ~ 0.08
S2500MA 0.4 ~ 3.0 0.35 ~ 2.6 650 290 0.6 198 7.8 26 1.0 30VDC 1.0 ~ 2.6 0.04 ~ 0.10 1.0 ~ 2.0 0.04 ~ 0.08
           

 

        

 
 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

Data Sheet Mini Electric Screwdrivers and Mini Electric/Vacuum  Screwdrivers
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section19/ds94.htm