DATA SHEET 19-006
  NEJICCO  - SAS 705A SCREW FEEDER
 ADJUSTABLE SCREW FEEDER FOR SCREWS - DIAMETERS 1.4 ~ 5.0mm

The Nejicco screw feeder is compact in size, allowing for an operator to operate more than one unit at a time.

Convenient to use, and it's wide adaptability means improved productivity for your operators.

There is no need to align the screws, simply put the screws into the hopper and the machine will sort and present the screws ready for the operator.

A large range of screws can be run through these units - for us to check please send to us at least 100 screws for trials to confirm.

The machine sorts screws ready and cuts off when a satisfactory amount have been presented - only starting again when more are required. 

This unit will cater for many size of screws and has an adjustable screw rail so that only one machine is needed to feed a range of screws.

 

 
   
 

TECHNICAL DATA

POWER

 :

12v powered by 220 or 110v transformer

SCREW TRAY SIZE

 :

100 mm x 42mm x 28mm

WEIGHT

 :

1.2 kgs
MINIMUM SCREW DIAMETER : 1.4 mm
MAXIMUM SCREW DIAMETER :

5.0mm 
MAXIMUM SCREW LENGTH : 18 mm
MACHINE WARRANTY : 12 Months

 
 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

 

Data Sheet Nejicco  Screw Feeder
can be found by clicking the following link :-
 http://www.series4.co.uk/prodeqpt/section13/ds19-006.htm

 

 

 

 

screw dispenser
screw sorter