DATA SHEET 58
  MODELS 318 / 300 - CABLE SPOOLER/WINDER
 BENCH OR FLOOR MOUNTED CABLE SPOOLERS/WINDERS

The Model 300 Coiler has a variable diameter of up to 250mm and can accommodate a maximum of 45m of 8mm diameter wire or tubing.


Cable is reeled on, possibly via a measuring meter such as the 1420.


The workpiece can then be tied and the 300 collapses flat for easy removal of the hank.


The unit can also be used as a dereeler for loose hanks of material to be fed into a cutting machine by expanding the unit around the hank to hold firm.

The Model 318 Spooler/Winder utilises the same frame as the Model 300 and will accommodate cable drums up to 250mm wide.


The full or empty drum is held firm by cones and secured by a quick release locking mechanism.


Can be used as a dereeler or re-reeler


 

TECHNICAL DATA 
UNIT WEIGHT (BOTH UNITS) : 2.7 kg
SHAFT DIAMETER : 12.5mm
WARRANTY : 12 Months

 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet 318 / 300
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section16/ds58.htm