DATA SHEET 53
  HP RANGE - ENAMEL WIRE STRIPPERS
HAND HELD ROTARY BRUSH ENAMEL STRIPPERS


Both the HP30 and HP35P are hand held portable units.

The HP30 machine is specially designed and suitable for thinner round and flat wires. The wire is pulled into the machine by the stripping brushes operating in opposite directions.

The HP35P machine is more suited to thicker round or flat wires. The brushes work in synchronization and therefore do not exert any pull on the wire.


 

HP30

HP35P
Brush Type For Wire Size Brush Type For Wire Size
SRB30.10 0.15 - 0.60mm SRB35.10 1.00 - 2.00mm
SRB30.15 0.40 - 1.00mm SRB35.15 1.50 - 2.50mm
SRB30.20 0.60 - 1.50mm SRB35.20 2.00 - 3.00mm
SRB30.25 0.80 - 2.00mm SRB35.25 2.50 - 4.00mm
SRB30.30 1.00 - 3.00mm SRB35.30 3.00 - 6.00mm

 

TECHNICAL DATA
BRUSH SIZE : HP30 ~ 30mm / HP35 ~ 35mm

WEIGHT

 :

HP30 ~ 2.1kg / HP35 ~ 2.4kg
VOLTAGE : 230v 50Hz (110v available by request)
WARRANTY : 12 Months

 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2011
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet HP Range
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section14/ds53.htm