DATA SHEET 48
  EC2 - ENAMEL WIRE STRIPPER
BENCH MOUNTED ELECTRIC ENAMEL WIRE STRIPPER

The EC2 will strip many film insulations including Enamel, Varnish, Formvar, ML etc for a range of wire sizes between 29 AWG (0.28mm OD) and 8 AWG (3.25mm OD)

Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed.

The insert is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

 


View AVI Video File of this machine working
Click on the Camcorder Below.
 
Best viewed with QuickTime

 

Further Technical Data
& Exploded Diagrams

Operation

Stripping Insert Options
Simple Setup & Stripping Operation

1. Loosen the Chuck Assembly with the two wrenches provided.

2. Place Stripping Insert into the chuck and hand tighten.

3. Place the work piece into the insert and tighten the Chuck Assembly with the wrenches provided so that the insert closes but the work piece can still be removed.

4. Remove the work piece and start the EC2.

5. Strip the wire by pushing into the Stripping Insert and remove to examine.

6. If insulation is not completely removed switch off EC2, tighten Chuck Assembly and repeat stripping operation.

 

TAPERED BULLET
For stripping in confined areas.

CONICAL FACE
For ease of wire entry into insert.

FLAT FACE
For stripping flush to the coil body.


Stripping Insert Selection

Wire Size

Heavy Duty

Carbide

AWG

Nominal OD mm

Cross Sectional
Area (mm Sq)

Conical Face

Flat Face

Tapered Bullet

Flat Face
29 - 20 0.28 - 0.81 0.06 - 0.52 C1 F1 B1 728C
20 - 16 0.81 - 1.30 0.52 - 1.33 C2 F2 B2 732C
16 - 14 1.30 - 1.63 1.33 - 2.09 C3 F3 B3 736C
14 - 12 1.63 - 2.06 2.09 - 3.33 C4 F4 B4 740C
12 - 10 2.06 - 2.59 3.33 - 5.27 C5 F5 B5 -
10 - 8 2.59 - 3.25 5.27 - 8.30 C6 F6 - -
8 - 6 3.25 - 4.11 8.30 - 13.30   F7 **    
6 - 4 4.11 - 5.18 13.3 - 21.10   F8 **    
** Note to use F7 and F8 Inserts the Larger Chuck assembly must be purchased - UK3406


TECHNICAL DATA
DIMENSIONS : 170 x 210 x 160mm 

WEIGHT

 :

3.8 Kg
VOLTAGE : 220 ~ 240v / 110v available on request
WARRANTY : 12 Months



Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet EC2
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section14/ds48.htm