ABISOFIX - Hand Held Enamel Wire Stripper

DATA SHEET 14-002

ABISOFIX - ENAMEL WIRE STRIPPER
HAND HELD ROTARY BLADE ENAMEL STRIPPER

The Abisofix is an all purpose tool capable of removing the enamel insulation from copper wire to facilitate termination, e.g., soldering wire ends of stator and transformer coils.

The abisofix stripping head utilises three weighted tungsten carbide blades, the depth of strip being controlled by a low voltage bench power supply / speed control unit.

A strip length limiter is an optional extra available fitted to the stripping head for accurate, repeatable results.

For batch production an optional electric footswitch and bench holder are also available.

Abisofix Enamel Wire Stripper & PSU

Abisofix Options

Power Supply - PS42
Switchable 110v / 220v Power Supply

Will power one hand piece only.

ABISOFIX Hand piece
This is the hand piece that plugs into the PS42 Power Supply for the unit to work. You can specify which stripping head you require fitted to this hand piece from the different types listed below.

Standard Stripping Head
A1 Head - Enamel Film 0.2 - 0.8mm OD
A3 Head - Enamel Film 0.6 - 2.0mm OD
A5 Head - Enamel Film 1.2 - 4.5mm OD

Standard Stripping Head
Inc Length Stop
A1\LM Head - Enamel Film 0.2 - 0.8mm OD
A3\LM Head - Enamel Film 0.6 - 2.0mm OD
A5\LM Head - Enamel Film 1.2 - 4.5mm OD

Special Stripping Head
AS Head - In special applications, especially with electronics it may be necessary to strip up very close to a component. Enamel Film 0.4 - 3.0mm OD.

Flat Set Blade Head
Stripping of cables and wires with a larger wall thickness. Only available with strip length stop and blade limiting
AFLM3 Head - 0.6 - 4.0mm OD
AFLM5 Head - 2.0 - 5.0mm OD

Small Stripping Head
Stripping and cleaning of wire pins of varnish or solder metal. Minimum distance of pins 5mm Stripping length 0.5mm to 30mm. The pin diameter is slightly adjustable.
AK1 Head - 0.5mm Diameter Wire / Pin
AK2 Head - 0.6mm Diameter Wire / Pin
AK3 Head - 0.7mm Diameter Wire / Pin
AK4 Head - 0.8mm Diameter Wire / Pin
AK5 Head - 0.9mm Diameter Wire / Pin
AK6 Head - 1.0mm Diameter Wire / Pin
AK7 Head - 1.1mm Diameter Wire / Pin
AK8 Head - 1.2mm Diameter Wire / Pin

MODEL R - Rasp Head for rectangular section

MODEL AV3 - For twisting stripped stranded wires from 0.18 - 2.5mm²
MODEL AV5 - For twisting stripped stranded wires from 0.25 - 6.0mm²

MODEL H Twisting Hook for twisting two or
more wires together

Abisofix Bench Holder - Turns the hand piece into a bench mounted unit
Part Number CF0500 - Holder & Footswitch - Hand piece not included

ABISOFIX TECHNICAL DATA

DIMENSIONS : 40mm x 180mm

WEIGHT
:
Handpiece 455g including cord

VOLTAGE : PS42 PSU Input 220 ~ 240v or 110v Output 42v

WARRANTY : 12 Months

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet Abisofix
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section14/ds14-002.htm

Power Supply - PS42 Switchable 110v / 220v Power Supply Will power one hand piece only.
ABISOFIX Hand piece This is the hand piece that plugs into the PS42 Power Supply for the unit to work. You can specify which stripping head you require fitted to this hand piece from the different types listed below.
Standard Stripping Head A1 Head - Enamel Film 0.2 - 0.8mm OD A3 Head - Enamel Film 0.6 - 2.0mm OD A5 Head - Enamel Film 1.2 - 4.5mm OD

Standard Stripping Head Inc Length Stop A1\LM Head - Enamel Film 0.2 - 0.8mm OD A3\LM Head - Enamel Film 0.6 - 2.0mm OD A5\LM Head - Enamel Film 1.2 - 4.5mm OD

Special Stripping Head AS Head - In special applications, especially with electronics it may be necessary to strip up very close to a component. Enamel Film 0.4 - 3.0mm OD.

Flat Set Blade Head Stripping of cables and wires with a larger wall thickness. Only available with strip length stop and blade limiting AFLM3 Head - 0.6 - 4.0mm OD AFLM5 Head - 2.0 - 5.0mm OD
Small Stripping Head Stripping and cleaning of wire pins of varnish or solder metal. Minimum distance of pins 5mm Stripping length 0.5mm to 30mm. The pin diameter is slightly adjustable. AK1 Head - 0.5mm Diameter Wire / Pin AK2 Head - 0.6mm Diameter Wire / Pin AK3 Head - 0.7mm Diameter Wire / Pin AK4 Head - 0.8mm Diameter Wire / Pin AK5 Head - 0.9mm Diameter Wire / Pin AK6 Head - 1.0mm Diameter Wire / Pin AK7 Head - 1.1mm Diameter Wire / Pin AK8 Head - 1.2mm Diameter Wire / Pin
MODEL R - Rasp Head for rectangular section
MODEL AV3 - For twisting stripped stranded wires from 0.18 - 2.5mm² MODEL AV5 - For twisting stripped stranded wires from 0.25 - 6.0mm²
MODEL H Twisting Hook for twisting two or more wires together
Abisofix Bench Holder - Turns the hand piece into a bench mounted unit Part Number CF0500 - Holder & Footswitch - Hand piece not included



Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008 Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323 Series 4 Web Site:- http://www.series4.co.uk Series 4 Sales Email:- sales@series4.co.uk