DATA SHEET 46
  ECT  - WIRE TWISTER FOR STRANDED WIRES
BENCH MOUNTED ELECTRIC WIRE STRAND TWISTER

The ECT Rotary Wire Twister quickly restores twist to pre-stripped stranded conductors

Just insert wire into rotating guide and withdraw.

Standard guide sleeve is drilled to 1.17mm (.046") which enables the smaller size wires to be twisted.

Guide sleeve may be drilled to accommodate your Requirements.

13 - 14 AWG ..... use drill size 2.26mm (0.089")
15 - 19 AWG ..... use drill size 1.78mm (0.070")
20 - 24 AWG ..... use drill size 1.17mm (0.046")

Comes equipped with three guide spacers in  3.2mm, 6.35mm and 12.7mm widths to permit twist lengths up to one inch.

Wire Twister

Further Technical Data
& Exploded Diagrams

 

TECHNICAL DATA
DIMENSIONS : 160 x 200 x 160mm 

WEIGHT

 :

3.8 Kg
WARRANTY : 12 Months


 

 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet ECT
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section13/ds46.htm