The SH Series  Push Pull Gauge offers a new efficient generation of push pull testing for using in conjunction with our SLK, SLR and SJV-5K range of Test Stands.  This digital gauge has a high resolution and accuracy making it suitable for a wide selection of testing applications,  ranging  from simple tension/compression force testing, to switch testing, connector insertion/withdraw testing and fracture testing. 

Features include:

High accuracy - (+/-0.5%)

High resolution - the smaller capacity gauges are capable of displaying a minimum load of 0.001N (1/5000 resolution)

Peak hold - hold the peak value in test

Peak hold and automatic reset (after selected time between 1 - 10 seconds resets to zero)

Auto power off - after set time

Comparative function

Calculation of the average value

Display of force in 3 units -  lbf, kgf, N - by push button selection

RS-232 port to printer

SH Series Push Pull Force Gauge  (with sensor) Specification:

The SH Series Push Pull Force Gauge is supplied in a carrying case with a variety of adaptors for common test applications (5 measuring tips are supplied in total) and an extension shaft.

The kit also includes an AC Adaptor, Fixing Screws, User Instructions, Calibration Certificate and CD with comprehensive user manual and software for data transfer.

The SH2 - SH500 Gauge (pictured left) features an internal sensor and is available in capacities from 2N up to 500N. 

The SH Gauge is also available in  larger capacities and this features a remote sensor making it suitable for very large testing applications up to a maximum force of  1000KN.

TECHNICAL DATA

DIMENSIONS	:	65 x 220 x 35
MAXIMUM LOAD	:	500 Newtons
ACCURACY	:	+/-0.5%
WEIGHT	:	625g
UNITS OF MEASUREMENT	:	lbf, kgf, N

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk