DATA SHEET 11-004
  SLK - TEST STAND VERTICAL OR  HORIZONTAL  MODEL
 MANUAL LOAD CELL PUSH / PULL TESTER TO 500 NEWTON'S 

The SLK  is a very stable manual Test Stand available as a vertical or horizontal model specially designed to take the Series 4 range of SN or SH Digital Push or Pull Gauges.  This unit, like the others in the range, offers exceptional quality with extremely reasonable pricing to provide an ideal test solution for many different applications.

This stand has a maximum capacity of 500N and a T-screw stroke power transfer.  This is an extremely stable unit to operate and can be easily positioned on top of a bench due to it's high stability. The Test Stand  is suitable for a variety of test purposes i.e. switch test,  fracture test, connector insertion/withdraw test.

This unit can be fitted with either the SN Analogy or SH series of Pull Force Gauges (see below).

This test stand is available for viewing at our demonstration facility, please phone to arrange an appointment.

Picture showing SLK fitted with SH Series Push Pull Force Gauge
(Gauge & Tooling Clamps purchased separately)
The force gauge specifications available for this test stand are listed below:

SN SERIES ANALOGY PUSH PULL FORCE GAUGE:

Model SN10 SN20 SN30 SN50 SN100 SN200 SN300 SN500
Cap N 10N 20N 30N 50N 100N 200N 300N 500N
Min Load 0.05N 0.1N 0.25N 0.25N 0.5N 1.0N 2.0N 2.5N
Error       +/-1%        

SH SERIES PUSH PULL FORCE GAUGE: (with sensor)

Model SH2 SH5 SH10 SH20 SH50 SH100 SH200 SH500
Cap N 2N 5N 10N 20N 50N 100N 200N 500N
Min Load 0.001N 0.001N 0.005N 0.01N 0.01N 0.05N 0.1N 0.1N
Error       +/-0.5%        
Tooling Options

Common Tooling Types:

SJ-01 500N
Sponge/foam/marble

SJ-02 500N
Springs

SJ-03 500N
Wires/cables/elec.comp.		 SJ-04 5000N
Sponge/foam		 SJ-06 500N
Steel wire/fishing wire		 SJ-07 50N
Light clamps - low load

SJ-08 500N
Wires/cables/elec.comp.		 SJ-10 500N
Sponge/brushes		 SJ-12 500N
Rubber/PCB/adhes. tape		 SJ-13 5000N
Wood/glass etc.		 SJ-16 5000N
Springs - tensile strength		 SJ-100 5000N
Wires & cables


Please phone for other tooling options.
 

TECHNICAL DATA

DIMENSIONS : 250 x 152 x 540mm
MAXIMUM LOAD : 500 Newtons
STROKE : T-Stroke

WEIGHT

 :

8.8 Kg - Net Weight
WARRANTY : 12 Months

 


Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

Data Sheet SLK Test Stand
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section11/ds11-004.htm