DATA SHEET 11-003
  SLR - TEST STAND VERTICAL OR  HORIZONTAL  MODEL
 MANUAL LOAD CELL PUSH / PULL TESTER TO 500 NEWTON'S 

The SLR  is a manual Test Stand available as a vertical or horizontal model specially designed to take the Series 4 range of SN or SH Digital Push or Pull Gauges.  This unit combines exceptional quality with extremely reasonable pricing to offer an ideal test solution for many different applications.

This stand has a maximum capacity of 500N and a 180mm stroke with trapezoid stroke power transfer.  This is an easy and stable unit to operate and is suitable for a variety of test purposes i.e. switch test,  fracture test, connector insertion/withdraw test.

This unit can be fitted with either the SN Analogy or SH series of Pull Force Gauges (see below).

This test stand is available for viewing at our demonstration facility, please phone to arrange an appointment.

 

Picture showing SLR fitted with SH Series Push Pull Force Gauge
(Gauge & Tooling Clamps purchased separately - see below)
 
The force gauge specifications available for this test stand are listed below:

SN SERIES ANALOGY PUSH PULL FORCE GAUGE:

Model SN10 SN20 SN30 SN50 SN100 SN200 SN300 SN500
Cap N 10N 20N 30N 50N 100N 200N 300N 500N
Min Load 0.05N 0.1N 0.25N 0.25N 0.5N 1.0N 2.0N 2.5N
Error       +/-1%        

SH SERIES PUSH PULL FORCE GAUGE: (with sensor)

Model SH2 SH5 SH10 SH20 SH50 SH100 SH200 SH500
Cap N 2N 5N 10N 20N 50N 100N 200N 500N
Min Load 0.001N 0.001N 0.005N 0.01N 0.01N 0.05N 0.1N 0.1N
Error       +/-0.5%        

Tooling Options

Common Tooling Types:

SJ-01 500N
Sponge/foam/marble

SJ-02 500N
Springs

SJ-03 500N
Wires/cables/elec.comp.		 SJ-04 5000N
Sponge/foam		 SJ-06 500N
Steel wire/fishing wire		 SJ-07 50N
Light clamps - low load

SJ-08 500N
Wires/cables/elec.comp.		 SJ-10 500N
Sponge/brushes		 SJ-12 500N
Rubber/PCB/adhes. tape		 SJ-13 5000N
Wood/glass etc.		 SJ-16 5000N
Springs - tensile strength		 SJ-100 5000N
Wires & cables


Please phone for other tooling options.
 

 

TECHNICAL DATA

DIMENSIONS : 250 x 360 x 470mm
MAXIMUM LOAD : 500 Newtons
STROKE : 180mm

WEIGHT

 :

18 Kg - Net Weight
WARRANTY : 12 Months

 


Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet SLR Test Stand
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section11/ds11-003.htm