SJV-5K

The SJV-5K is an Electric vertical motorised test stand specially designed to take the Series 4 range of digital push or pull gauges.

This dual – vertical stand pole with single motorised screw feed is easy to use and comes complete with standard grips (as shown) - upper and lower auto shut off switches and base round table platen.

It can be used for many industrial applications including automotive, mechanical industry and scientific research etc.

The maximum pull / push force is 5000 Newton's (Approx 500kg) and can be fitted with any of the digital load cell options up to 5000N

Picture showing SJV-5K
(Load Cell purchased separately)

Tooling Options

Common Tooling Types:


SJ-01 500N Sponge/foam/marble	SJ-02 500N Springs	SJ-03 500N Wires/cables/elec.comp.	SJ-04 5000N Sponge/foam	SJ-06 500N Steel wire/fishing wire	SJ-07 50N Light clamps - low load

SJ-08 500N Wires/cables/elec.comp.	SJ-10 500N Sponge/brushes	SJ-12 500N Rubber/PCB/adhes. tape	SJ-13 5000N Wood/glass etc.	SJ-16 5000N Springs - tensile strength	SJ-100 5000N Wires & cables

For other tooling requirements please phone.

TECHNICAL DATA

DIMENSIONS : 400 x 250 x 1020mm

MAXIMUM LOAD : 5000 Newtons

TEST SPEED : 0 ~ 240mm / min Max

MAXIMUM LOAD : 5000 Newtons

MAXIMUM GAP : 250mm

TEST JOURNEY : 200mm

CURRENT : 0.5A Working - 1.5A Max

WEIGHT
:
54 Kg - Net Weight

WARRANTY : 12 Months

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet SJV-5K Motorised Pull Tester
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section11/ds11-002.htm