Digital Pull Tester

The DPT is a Digital Load Cell Pull Tester for cables and crimps.

It has a capacity up to 50 Kg (100 lbs, 500 Newton's)

It can display results in Kg, Lbs or Newton's and has a peak setting for non-destructive testing.

The Load Cell is mains or re-chargeable battery powered.

Exploded Diagram
of DPT50

TECHNICAL DATA

DIMENSIONS : 100 x 480 x 140mm (245 inc Handle)

STANDARD CRIMP PROFILE SLOTS
:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5mm Specials on request

WEIGHT
:
3.2 Kg

WARRANTY : 12 Months

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2011
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet DPT - Digital Pull Tester
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section11/ds11-001.htm

Suggested pull off data for crimps Please confirm with your customer the correct pull off data for each crimp & terminal DO NOT use this data - this data is only a guide.
CONDUCTOR SIZE			MINIMUM PULL-OFF
CSA mm²	Strands/CSA	Kg		NEWTON'S
0.22	7/0.2	3.0		30
0.50	16/0.2	7.0		70
0.75	24/0.2	10.0		100
1.00	32/0.2	14.0		140
1.50	30/0.25	21.0		210
2.50	50/0.25	28.0		280
4.00	7/0.85	51.0		510
6.00	84/0.3	60.0		600
10.00	84/0.4	100.0		1000