|
||||||||
| The CRIMP CRADLE uses a highly efficient
tooling set which provides a mechanical advantage, when hand crimping of
approximately 10 to 1.
If a hand tool requires 20 kg of operating force the CRIMP CRADLE will require only 2 kg to perform the same operation.
Clamps in the base of the unit, in conjunction with two roller bar tool holders, can be raised, lowered or rotated to accommodate 90% of all hand crimp tools available. This includes both single and double arm movement tools.
A single adjustable clamping mechanism attaches to the upper handle of the crimp tool.
|
|
|
|
|
|
CRIMP CRADLE OPEN. |
CRIMP CRADLE CLOSED |
| BENEFITS Can double the output of hand crimping operations due to less handling and shorter cycle times. Reduces fatigue due to 90% less effort. Greatly reduces risk of Repetitive Strain Injuries. Squeeze force judgment is eliminated as tool reaches a positive stop position at the end of each operation cycle. Reduces rejects due to insertion difficulties when compared to conventional hand use. Safer than many small bench pneumatic tools and a fraction of the cost. |
FEATURES Safe, fast, one hand operation. Manual operation, no power or compressed air required. Portable, easily bench mounted by clamps or can be bolted down for permanent sitting. Quick and simple to set up and adjust. Hand tool calibration unaffected. The Crimp Cradle will accept hand tools with an open span between handles of up to:- 305mm (12") WEIGHT:- 2.5kg |
 |
|
 |
Series 4 Limited / Wire
Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk
Data Sheet Crimp Cradle
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section10/ds33.htm