DATA SHEET 10-007
  ELECTRIC CRIMPER EC-23
 BENCH ELECTRIC CRIMPER  USING UNIVERSAL CRIMP DIES

 

The EC-23 Electric Crimper is a flexible bench top machine capable of crimping a wide range of connectors and offering superb value for money. The design of this unit allows for quick and easy change over of crimping dies and requires no special tools. 

This machine comes supplied with 8 crimping dies but what sets the EC-23 apart from other models on the market, is that it will accept most universal crimping die sets. This offers huge versatility and eliminates the need to buy machine specific die sets which are often costly and cannot be used in other tools. Special crimping die sets can also be manufactured if required.

The EC-23 Crimper utilizes a high quality fixed speed motor which delivers high efficiency not only on crimping force but also in crimping speed.  This makes this crimper suitable for working medium to high quantities of crimps.


 

 

 





Standard Crimping Die - shown fitted to EC-23

 

 

The EC-23 Crimping Machines comes supplied a standard red, yellow, blue crimping die set and also with the following crimping die sets:
 
Die Type HS-101

AWG. 17 ~ 7

DIN.1.0 ~ 10.0mm˛



Die Type HS-04WFL

AWG. 20 ~ 12

DIN.0.5 ~ 4.0mm˛ 


Die Type HS-03B

AWG. 17 ~ 12

DIN. 1.0 ~ 4.0mm˛
 


Die Type C-C7

CU/AL diam. 7mm or less

 


Die Type HS-10

AWG. 22 ~ 10

DIN. 1.5 ~ 6.0mm˛


Die Type HS-02H

Fibre optic, Belden 8279, 55, 58, 59, 62, 140, 142, 223, 303, 400


Die Type LY-03C

AWG. 20 ~ 10

DIN. 0.5 ~ 6.0mm˛

See picture left

 Die Type Standard

Red/yellow/blue terminals

1.5 - 6.0mm
 

In addition to the 8 crimping die sets supplied with the machine, most universal crimping die sets will  also fit.  We  supply a further range of low cost, high quality crimping die sets, all of which fit easily to the EC-23 and can be purchased individually:


HT Die Sets

Die:











Code: HT-236A HT-236C HT-236H1 HT-236I HT-236PA HT-336C1 HT-336C2 HT-336E HT-336F1 HT-336F2
Hex Size:

6.48, 4.75,  1.72, 5.41mm

AWG 20~18, 16~14 12~10

6.48, 8.13, 8.90mm

6.30, 5.18, 2.29, 1.72, 7.90mm

6.48, 5.41, 2.50, 1.72, 8.23mm

1.72, 5.49, 8.23, 9.14mm

1.72, 6.65, 8.23, 9.14mm

DIN 0.5, 0.75, 1.0, 1.5, 2.5, 4.0mm˛

1.07, 1.72, 3.38, 4.11, 4.95mm

1.07, 1.72, 3.84, 4.52, 5.41mm
Connector:

RG58, 59, 62, 174

Interlocking & non insulated

CATV F connectors RG59, 6

RG58, 59, 62, 174

RG58, 59, 62, 6

F-59, 62, 6

CATV F connectors RG59, 6

Pin terminal insulated & non-insulated ferrules

Fibre optic SMA (oval)

RG58, 59, 62, 174, Fibre Optic
Die:










 
Code: HT-336G HT-336H HT-336K3 HT-336N HT-336R HT-336S HT-336U HT-336W HT-336V  
Hex Size: 1.09, 1.72, 2.54, 3.48, 5.41, 6.48mm DIN 0.5~1.0, 1.5~2.5, 4-6mm˛ 6.50m 1.72, 7.49mm DIN 1.5, 2.5, 6, 10mm˛ AWG 22~18, 16~14, 12~10 AWG 10, 8, 6 AWG 14~22 AWG 22~8, 16~14, 12~10 1.09, 1.75, 2.54, 3.25, 3.84, 5.41mm  
Connector: RG58, 59, 62, 174, Fibre Optic Insulated terminal RG59, 6 Non-insulated terminals Vinyl insulated w/o copper sleeve Pin terminal insulated or non-insulated ferrules Non-insulated Insulated terminals SMA, SMB, SMC, MCX  


This item can be viewed at our demonstration facility. Customers are also welcome to send connector samples for crimping die identification and wires and connectors for sampling.


TECHNICAL DATA

MAXIMUM CRIMPING FORCE

 :

INSULATED TERMINAL 5.5mm˛

CRIMPING TIME

 :

1.5 SECONDS (60HZ), 1.8 SECONDS (50 HZ)

VOLTAGE

 :

AC 200-230V

POWER CONSUMPTION

 :

90W
DIMENSIONS :

(L x W x H) 325 x 265 x 150mm
WEIGHT : 13.5kg
WARRANTY : 12 Months

 

 

 
 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

Data Sheet Electric Crimper EC-23
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section10/ds10-007.htm