It is well suited for complex cable harness assembly applications.

The EC65 electric crimping machine can be operated in one of two modes.

Mode 1. Operates the entire crimping process with one depression of the foot pedal.

Mode 2. Allows the user to fix the terminal on the cable by depressing the foot pedal once. The second depression of the foot pedal actually finishes the crimping process. Mode 2 is used when more complicated terminals are selected.

As the die get closed, the full press capacity is limited to insure safety. The beginning of the press power can be adjusted with each new terminal to satisfy crimp integrity. That way, damage to the dies & terminals can be minimised.

Simply press a button to select the width of the opening of each die.

Since some female terminals are more difficult to crimp, a moveable locator can be utilised to insure proper crimping as well as making the crimping easier and more precise.

View AVI Video File of this machine working
 Click on the Camcorder Below.

       Best viewed with QuickTime

TECHNICAL DATA

MAXIMUM PRESS CAPACITY	:	10kN
DIMENSIONS	:	140mm x 220mm x 320mm
WEIGHT OF FOOT PEDAL	:	1.2kg
PRESSING TIME	:	1 Second
COUNTER	:	6 Digit LCD Display
POWER	:	230v 50Hz (120v 60Hz)
POWER CONSUMPTION	:	160 VA
WEIGHT	:	10.0kg
WARRANTY	:	12 Months

0.14-1.0 / 1.5 / 2.5 / 4 mm˛

6 / 10 mm˛

0.25-0.34 / 0.5-0.75 / 1 - 1.5 / 2.5 / 4 / 6 mm˛

10 / 16 / 25 mm˛

35 / 50 mm˛

4 / 6 / 10 mm˛ Twin

0.5 – 6 mm˛

0.5 – 6 mm˛

0.10 – 1.5 mm˛

0.1 - 0.5 / 0.5 - 1 / 0.5 - 1.5 mm˛

0.5 - 1.5 / 2.5 / 4 - 6 mm˛

0.5 – 0.75 mm˛

1.0 – 1.5 mm˛

0.34 - 0.75 / 1 - 1.5 / 2.5 mm˛

4 / 6 / 10 mm˛ See Note 1

4 / 6 / 10 mm˛ See Note 2

4 / 6 / 10 mm˛ See Note 3

4 / 6 / 10 mm˛ See Note 4

0.5 - 1.5 / 1.5 - 2.5 / 4 – 6 / 10mm˛

16 mm˛

Note 1 -Terminal Lug Size
4mm² = 5mm OD / 3mm ID
6mm² = 6.5mm OD / 3.5mm ID
10mm² = 7mm OD / 4.5mm ID

Note 2 -Terminal Lug Size
4mm² = 5mm OD / 3mm ID
6mm² = 6mm OD / 4mm ID
10mm² = 8mm OD / 5mm ID

Note 3 -Terminal Lug Size
4mm² = 5mm OD / 3mm ID
6mm² = 5.5mm OD / 3.8mm ID
10mm² = 6mm OD / 4.5mm ID

Note 4 -Terminal Lug Size
4mm² = 5mm OD / 2.7mm ID
6mm² = 5.5mm OD / 3.3mm ID
10mm² = 6.8mm OD / 4.2mm ID

OD = Outside Diameter / ID = Inside Diameter