DATA SHEET 25
  DE101  - ROTATING ARM CABLE DISPENSER
 BENCH OR FLOOR MOUNTED FOR DRUMS UP TO 100kg

The DE101 Rotating Arm Dispenser is a
versatile system which allows cable up to 10mm OD to be fed directly into processing machinery without rotation of the cable drum. 

The rotating arm ensures low inertia utilizing a small spring brake to elimate cable overruns.

The DE101 incorporates a clamp mechanism at the rear of the drum to firmly hold the cable drum in place.

The dispenser is bench or floor mounted with the addition of an extension bar (supplied as standard and shown assembled in the picture on the right)

The DE101 can be adjusted to suit the height of the cable processing equipment being used.

 

TECHNICAL DATA

CABLE

 :

Flexible round insulated cable to 10mm OD

SIZE ASSEMBLED (FLOOR STANDING) 

 :

410mm x 570mm x 1280mm (Max)

SIZE ASSEMBLED (BENCH STANDING) 

 :

410mm x 570mm x 520mm (Max)

WEIGHT

 :

6.7kg (Bench Standing) 8.9kg (Floor Standing)
CABLE DRUM CAPACITY : Diameter 500mm Length 330mm Weight 100kg
DISPENSER ARM 1 SUPPLIED AS STANDARD :

Max drum diameter 300mm Cable Dia 3.5mm
DISPENSER ARM 2 SUPPLIED AS STANDARD : Max drum diameter 400mm Cable Dia 3.5mm
DISPENSER ARM 3 SUPPLIED AS EXTRA OPTION : Max drum diameter 500mm Cable Dia 10.0`mm
WARRANTY : 12 Months


Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet DE101
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section09/ds25.htm