Komax Blades & Parts *

Komax Blades & Parts *

S4 Part Number Suit Machine Cost & Material Picture
KX3301-M9 Komax 33
(Long Blade)		 £23.50 each
 M9 Tool Steel

KX3302-M9 Komax 33
(Short Blade)		 £23.50 each
 M9 Tool Steel

KX3301-CB Komax 33
(Long Blade)		 £33.00 each
Tungsten Carbide

KX3302-CB Komax 33
(Short Blade)		 £33.00 each
 Tungsten Carbide

KD00-000-00

Komax 33
Replacement MDU Board
 

£199.00 each
Service Exchange MDU Board
Left Roller Motor, Right Roller Motor
 or Cutting Blade Motor

Note 1:- Service Exchange Unit
Note Main Chip can be either
Sanken SI-7230M or SI-7230E

Note 2:- This is genuine Kodera
replacement unit that will fit the
Komax 33 machine.

KX3401-CB Komax 34 £39.00 each
 Tungsten Carbide
2 Required for a set

KX3401-M9 Komax 34 £29.95 each
M9 Tool Steel
2 Required for a set

KX3301-CB Komax 35 £33.00 each
 Tungsten Carbide
2 Required for a set

KX3601-CB Komax 36
(Long Blade)		 £33.00 each
 Tungsten Carbide

KX3602-CB Komax 36
(Short Blade)		 £33.00 each
 Tungsten Carbide

KX0099-CB Komax 40
(T5 Butting Cut Off Blades)		 £39.95 each
(1 Blade)
 Tungsten Carbide


 
KX0099 Komax 40
(T5 Butting Cut Off Blades)		 £19.94 Per Pair
 (2 blades)
Tool Steel


 
KX0098 Komax 40
(T5 Butting Cut Off Blades)
Special 1mm thick blade set		 £24.45 Per Pair
 (2 blades)
Tool Steel


 
KX0099-HSS Komax 40
(T5 Butting Cut Off Blades)		 £10.00 each
 (1 blade)
M9 Tool Steel


 



KX1003-CB
KX1004-CB
KX1005-CB
Through to

KX1084-CB
KX1085-CB

Komax 40
(Stripping Die Blades)
0.3mm
0.4mm
0.5mm

Through To

8.4mm
8.5mm

£39.95 each
 (1 Blade)
 Tungsten Carbide



KX1003-TC
KX1004-TC
KX1005-TC
Through to

KX1084-TC
KX1085-TC

Komax 40
(Stripping Die Blades)
0.3mm
0.4mm
0.5mm

Through To

8.4mm
8.5mm

£21.50 Per Pair
 (2 Blades)
Tool Steel
C/w Titanium Nitride Coating



KX1003
KX1004
KX1005
Through to

KX1084
KX1085

Komax 40
(Stripping Die Blades)
0.3mm
0.4mm
0.5mm

Through To

8.4mm
8.5mm

£19.95 Per Pair
 (2 Blades)
Tool Steel



KX2005
KX2006
Through to

KX2129
KX2130

Komax 40
(Guide Plates)
0.5mm
0.6mm

Through To

12.9mm
13.0mm

£13.49 Per Pair
 (2 Guides
Tool Steel

KXGM311-001

Komax Gamma 311
Drive Wheels

£129.00 per pair
 (2 Rollers)
 

* Manufactured either in house by Series 4 or other manufacturers
these are not Komax original blades or parts

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

Data Sheet on Komax Blades
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section06/komax/ds87.htm