DATA SHEET 05-001   MODEL 39 - ELECTRIC CABLE CUTTING MACHINE CUTS EQUIPMENT WIRE & TUBING UP TO 25.4mm O.D. 101.6mm WIDE

The model 39 Compu-Cut is an all Electric, fully programmable bench top Measure cable cutting machine utilizing High Torque Stepper Motors and a Precision Ball Screw Blade Mechanism. Powerful, yet compact, the Model 39 produces clean and accurate cuts on material ranging from 25.4mm in diameter to 101.6mm in width. This new cable cutting machine with full microprocessor control, set-up is fast and easy, simply adjust the two material guides, load the material to be processed and enter the required data via the user friendly keypad and the machine is ready to run. The model 39 cable cutting machine requires no maintenance other than changing Feed Rollers and Blades, both of which can be done in minutes using only one wrench.

 

TECHNICAL DATA VOLTAGE : 85-264vac 47/63Hz 3A (automatic switching) SIZE : 460mm x 280mm x 532mm WEIGHT : 32.0kgs SOLID CORE WIRE SIZE MAXIMUM : 4.0mm2 + Insulation STRANDED WIRE & BRAID SIZE MAXIMUM : 8.0mm2 + Insulation FLAT CABLE & TUBING : 101.6mm Wide FEED RATE : 50 ~ 1200mm / Second ELECTRONICALLY SETTABLE FOR PIECES : 1 ~ 999,999 ELECTRONICALLY SETTABLE FOR LENGTH : 1 ~ 999,999mm (999.999 Meters) ELECTRONICALLY SETTABLE FOR LENGTH : 1 ~ 999,999 inches MACHINE WARRANTY : 12 Months

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet of the Model 39
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section05/ds05-001.htm