Hand Crimpers

DATA SHEET 04-001

CRIMP FRAME HAND TOOL
MODULAR SYSTEM WITH INTERCHANGEABLE DIES

The Crimp Frame Hand Tool offers a low cost solution for crimping a wide variety of connectors. It is a modular system that consists of a crimp frame in which you can insert a variety of die sets that cover most common crimping applications.

This Hand Tool fits in to both our Crimp Cradle System and also the Crimp Table - both of which offer force reduction solutions.

Pick from the wide range of dies -pictured below:

HT Die Sets

Die:

Code: HT-236A HT-236C HT-236H1 HT-236I HT-236PA HT-336C1 HT-336C2 HT-336E HT-336F1 HT-336F2

Hex Size:
6.48, 4.75, 1.72, 5.41mm

AWG 20~18, 16~14 12~10

6.48, 8.13, 8.90mm

6.30, 5.18, 2.29, 1.72, 7.90mm

6.48, 5.41, 2.50, 1.72, 8.23mm

1.72, 5.49, 8.23, 9.14mm

1.72, 6.65, 8.23, 9.14mm

DIN 0.5, 0.75, 1.0, 1.5, 2.5, 4.0mm²

1.07, 1.72, 3.38, 4.11, 4.95mm

1.07, 1.72, 3.84, 4.52, 5.41mm

Connector:
RG58, 59, 62, 174

Interlocking & non insulated

CATV F connectors RG59, 6

RG58, 59, 62, 174

RG58, 59, 62, 6

F-59, 62, 6

CATV F connectors RG59, 6

Pin terminal insulated & non-insulated ferrules

Fibre optic SMA (oval)

RG58, 59, 62, 174, Fibre Optic

Die:

Code: HT-336G HT-336H HT-336K3 HT-336N HT-336R HT-336S HT-336U HT-336W HT-336V

Hex Size: 1.09, 1.72, 2.54, 3.48, 5.41, 6.48mm DIN 0.5~1.0, 1.5~2.5, 4-6mm² 6.50m 1.72, 7.49mm DIN 1.5, 2.5, 6, 10mm² AWG 22~18, 16~14, 12~10 AWG 10, 8, 6 AWG 14~22 AWG 22~8, 16~14, 12~10 1.09, 1.75, 2.54, 3.25, 3.84, 5.41mm

Connector: RG58, 59, 62, 174, Fibre Optic Insulated terminal RG59, 6 Non-insulated terminals Vinyl insulated w/o copper sleeve Pin terminal insulated or non-insulated ferrules Non-insulated Insulated terminals SMA, SMB, SMC, MCX

These die sets can also be used on our EC23 Crimper.

TECHNICAL DATA

DIMENSIONS :
(L x W) 220 x 70

WEIGHT : 436g (Hand Tool only)

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet Crimp Frame Hand Tool
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section04/ds04-001.htm

Die:
Code:	HT-336G	HT-336H	HT-336K3	HT-336N	HT-336R	HT-336S	HT-336U	HT-336W	HT-336V
Hex Size:	1.09, 1.72, 2.54, 3.48, 5.41, 6.48mm	DIN 0.5~1.0, 1.5~2.5, 4-6mm²	6.50m 1.72, 7.49mm	DIN 1.5, 2.5, 6, 10mm²	AWG 22~18, 16~14, 12~10	AWG 10, 8, 6	AWG 14~22	AWG 22~8, 16~14, 12~10	1.09, 1.75, 2.54, 3.25, 3.84, 5.41mm
Connector:	RG58, 59, 62, 174, Fibre Optic	Insulated terminal	RG59, 6	Non-insulated terminals	Vinyl insulated w/o copper sleeve	Pin terminal insulated or non-insulated ferrules	Non-insulated	Insulated terminals	SMA, SMB, SMC, MCX