Simplomat - Outer Cable Stripping Machine

			DATA SHEET 100
	SIMPLOMAT - PNEUMATIC CABLE STRIPPER OUTER JACKET STRIPPER UP TO 34mm OD and 1000mm Strip Length

The Simplomat is a pneumatic stripping machine for single and multi core cables.

The cable is inserted into a sleeve until an adjustable length stop is reached

The stripping machine is activated by a foot pedal.

The blades on this machine can be quickly changed without the use of special tools.

Special knives are available for stripping rubber cables

Different versions of this machine are available depending on your requirements. Please contact our factory

The changing of Knives (Blades) can be carried out quickly without the use of any special tools.

Knives (Blades) Sleeves & Pressure Blocks are stored safely in this special tooling box.

Simplomat 20 Range

MAXIMUM CABLE DIAMETER
:
20mm

KNIFE SIZES
:
1.0mm ~ 16.0mm in 0.5mm Graduations

GUIDE SLEEVES
:
2.0mm ~ 16.0mm in 1.0mm Graduations

Simplomat 30 Range

MAXIMUM CABLE DIAMETER
:
30mm

KNIFE SIZES
:
1.0mm ~ 26.0mm in 0.5mm Graduations

GUIDE SLEEVES
:
2.0mm ~ 25.0mm in 1.0mm Graduations

Simplomat 34 Range

MAXIMUM CABLE DIAMETER
:
34mm

KNIFE SIZES
:
1.0mm ~ 26.0mm in 0.5mm Graduations

GUIDE SLEEVES
:
2.0mm ~ 25.0mm in 1.0mm Graduations

Machine Technical Data
Type 20/50 Type 20/200 Type 30/50 Type 30/200 Type 30/350 Type 30/500 Type 30/1000

Stripping Length (Variable) 50 200 50 200 350 500 1000

Width in mm 300 450 320 600 600 600 600

Depth in mm 550 900 600 950 1250 1550 2550

Height in mm 270 270 310 310 310 310 310

Weight (approx) in Kg 25 38 39 52 59 66 80

Air Pressure 6 6 6 6 6 6 6

Air Consumption in Litres with max strip length achieved 3.5 10.9 5.3 16.7 26.7 36.7 70.2

Number of pieces per hour using max strip length 1200 600 1200 600 400 300 200

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377 Fax +44 (0)23 8086 6323
Series 4 Web Site:- http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

Data Sheet Simplomat
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section03/ds100.htm

	The changing of Knives (Blades) can be carried out quickly without the use of any special tools.
Knives (Blades) Sleeves & Pressure Blocks are stored safely in this special tooling box.

Machine Technical Data	Type 20/50	Type 20/200	Type 30/50	Type 30/200	Type 30/350	Type 30/500	Type 30/1000
Stripping Length (Variable)	50	200	50	200	350	500	1000
Width in mm	300	450	320	600	600	600	600
Depth in mm	550	900	600	950	1250	1550	2550
Height in mm	270	270	310	310	310	310	310
Weight (approx) in Kg	25	38	39	52	59	66	80
Air Pressure	6	6	6	6	6	6	6
Air Consumption in Litres with max strip length achieved	3.5	10.9	5.3	16.7	26.7	36.7	70.2
Number of pieces per hour using max strip length	1200	600	1200	600	400	300	200