DATA SHEET 10
  CS2000  - LEVER STRIPPER
LOW COST, OUTER JACKET STRIPPER FOR CABLES UP TO 30.5mm O.D.

 
The CS2000 is a robust bench mounted, hand operated Lever Stripper designed to strip many kinds of extruded insulations including PVC, Polythene, Rubber and Nylon

The lever handle action gives excellent mechanical advantage and automatically operates the precision ground die blades and cable grippers in one easy movement

A large selection of standard blades is available and specific blade sizes can be manufactured to order. A cable length stop and cable rest plus a simple set-up procedure ensures accurate and repetitive strip quality

 

Machine Cable Stripping Spec

* - Strip length maximum is for one cycle of the unit. Strip length may be increased by cycling the strip.


Further Technical Data
& Exploded Diagrams

Standard Die Blade Selection
Blade Number Blade Diameter mm Blade Number Blade Diameter mm Blade Number Blade Diameter mm
UK7007 2.00 UK7014 7.40 UK7021 15.90
UK7008 2.70 UK7015 8.50 UK7022 18.30
UK7009 3.30 UK7016 9.50 UK7023 20.20
UK7010 3.70 UK7017 10.70 UK7024 22.20
UK7011 4.80 UK7018 11.50 UK7025 24.20
UK7012 5.40 UK7019 12.70 UK7026 26.20
UK7013 6.20 UK7020 14.30 UK7027 28.50



Operation

Die Blade Options
Simple Setup & Stripping Operation

Select Correct Die Blades for Cable Size.

Fit to Blade Holders and Lock in Position.

Set Adjustable Length Stop for the Correct Strip Length.

Push Lever Handle Forwards to Open Blades.

Lay Cable on Cable Rest and Position to Length Stop.

Pull Back on Lever Handle, the Cable is Automatically Gripped by the Clamps, and the Stripping Blades Close to Remove the Insulation Slug.

Standard Die Blade SetSTANDARD
For round wires and cables the design of the blade holder enables adjustment up to next blade size.

FLAT
Flat die blades will strip down to very fine wire providing there is sufficient insulation thickness for the blades to sever. They are also good for stripping flat telecom type cable.

SPECIAL
Custom manufactured for your specific application can be made for ribbon, 'D' Telecom, Bell wire etc.

TECHNICAL DATA

POWERED BY

 :

Mechanical Hand Operation

SIZE

 :

170 x 290 x 140mm Excluding Handle & Stop

HANDLE & LENGTH STOP SIZE

 :

Handle 340mm Length Stop 280mm

WEIGHT

 :

6.5 KG
MINIMUM STRIP LENGTH : 2.0mm
MAXIMUM STRIP LENGTH :

86.5mm Longer Lengths can be achieved by cycling of the strip this also depends on the cable construction.
MINIMUM WIRE DIAMETER : 3.0mm O.D.
MAXIMUM WIRE DIAMETER : 30.5mm
MACHINE WARRANTY : 12 Months

The CS2000 is manufactured in house in the UK by Series 4 - the above process shows the CNC machining of the casting prior to assembly.

 

Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

Data Sheet CS2000 - Lever Stripper
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section03/ds10.htm