DATA SHEET 1
  DPF1000 - WIRE STRIPPING MACHINE
LOW COST, FAST & ACCURATE WIRE STRIPPING & TWISTING

The DPF1000 Wire Stripping machine will strip many insulations including PVC, PTFE, Teflon, Rubber, for a wide range of wire sizes between 0.8 mm ~ 5.2 mm overall diameter (Approx wire gauge of between 4 ~ 20 AWG)

A precision hinged carbide blade is centrifugally operated to produce a precise stripping action. To strip a wire simply insert into the unit and withdraw.

Blade setting is locked into place with no chance of adjustment drift or conductor damage. On stranded wires the removal of the insulation slug leaves the strands neatly twisted for termination or soldering.

The DPF1000 is fully guarded for operator protection and includes an automatic motor cut-out if the Stripping Head Guard is inadvertently removed.

Wire Stripping Machine

 

Wire Stripper - Head Set Up

Simple Set-up and stripping operation

Select a Wire Guide for the correct wire diameter (see wire guide selection chart below) Insert into Stripping Head and lock into place with Locking Screw. Loosen Blade Block Locking Screw and set blade to conductor thickness.

Set Strip Length Stop to required stripping length Insert wire into Stripping Head until it touches the length stop, pause momentarily then withdraw wire. If the blade contacts the conductor(s) or the insulation slug is not removed adjust blade in or out as required and repeat test strip.

All adjustments can be made in situ on the machine

 

WIRE GUIDE SELECTION
 Diameter in mm refers to hole size of wire guide - if you have a wire with 3mm OD (including insulation)
then you would need a wire guide of 3.2mm - Guide Number 11
Guide
Number		 Diameter
(mm)		 Guide
Number		 Diameter
(mm)		 Guide
Number		 Diameter
(mm)
1 5.2 9 3.6 17 2.0
2 5.0 10 3.4 18 1.8
3 4.8 11 3.2 19 1.6
4 4.6 12 3.0 20 1.4
5 4.4 13 2.8 21 1.2
6 4.2 14 2.6 22 1.0
7 4.0 15 2.4 23 0.8
8 3.8 16 2.2

TECHNICAL DATA

VOLTAGE

 :

110/220/240V 50/60 Hz

SIZE

 :

260mm x 160mm x 138mm

WEIGHT

 :

6 kgs
MINIMUM STRIP LENGTH : 0.50mm
MAXIMUM STRIP LENGTH :

30.0mm 
MINIMUM WIRE DIAMETER : 0.70mm O.D.
MAXIMUM WIRE DIAMETER : 5.1mm
MACHINE WARRANTY : 12 Months


Series 4 Limited / Wire Stripping / Copyright © Series 4 Limited 1995 ~ 2008
Tel +44 (0)23 8086 6377    Fax +44 (0)23 8086 6323
Series 4 Web Site:-  http://www.series4.co.uk
Series 4 Sales Email:- sales@series4.co.uk

 

 

 

 

Data Sheet DPF1000 - Wire Stripping Machine
can be found by clicking the following link :-
http://www.series4.co.uk/prodeqpt/section01/ds1.htm